The Breitling Watch Source Forums

Going to 'sticky' this. Seems to have been an increase in questions lately.

Had my navitimer bracelet switched to my Navitimer Olympus which required new endings - the official service center here in Tokyo used 441A. Its a perfect fit too.

The bracelet came from a Montbrilliant 1461 which was sporting 401 endings - which were not flush with the casing arms (no idea where these came from).

It should be a perfect fit, 441A is the same as 425A.

2006/2007 Handbook

Chrono-Matic 24H - 435A 22mm Navitimer

Cockpit Lady - 780A 16mm Pilot or 367A 16mm Pilot
Blackbird - 362A/369A 22mm Pilot or 371A 22mm Pilot (brushed) or 374A 22mm Pilot (polished)

Airwolf - 140A 22mm Pro2
Skyracer - 140A 22mm Pro2

Bentley Motors T - 974A 24mm Speed (brushed/polished) or 991A 24mm Speed (brushed/polished)
Bentley GT Racing - 975A 22mm Speed (brushed/polished) or 981A 22mm Speed (brushed/polished)

Updated. Thanks to findo-400 and especially bnewbie for the Help.

_________________
Breanach78

A Few Breitlings.

Breitling For Bentley updated.

_________________
Breanach78

A Few Breitlings.

2008/2009 Handbook

Montbrillant A41370 - 444A 20mm Navitimer
Montbrillant Legende - 445A Navitimer Integrated
Chrono-Matic 49 - 146A 24mm Aero Classic

Avenger Skyland - 132A 22mm Pro2
Avenger Seawolf Chrono - 147A 22mm Pro2
Avenger Seawolf SS - 147A 22mm Pro2
Superocean Heritage Chrono - 144A 24mm Ocean Classic
Superocean Heritage 46 - 144A 24mm Ocean Classic
Superocean Heritage 38 - 149A 20mm Ocean Classic

Bentley GMT - 998A Speed
Flying B - 995A 24mm Speed B
Flying B Chrono - 995A 24mm Speed B
Flying B No3 - 984A 21mm Speed B
Mark VI - 996A 22mm Speed
Mark VI Complications 19 - 996A 22mm Speed

That's all folks.
I edited a lot to put any known ref# and bracelet model, 100% accurate from the Handbooks.

I have two Grand Premiers (case diameter 40 mm), a black dial one on Navi bracelet with end links number 440A and a silver/cream dial one with yellow gold accents on dial and hands, this one now on brown calfskin leather.
I'd like to "upgrade" a bit the latter one and now I might have a chance to buy a used Navi bracelet steel/yellow gold. The bracelet is mounted now on an Old Navitimer ref. D13322 which has a 41.5 mm total diameter (bezel stands out a bit so case might be around 40 mm too but I'm not sure about that). I don't know (yet) the end link number of the steel/gold Navi bracelet for sale.
The price of the bracelet seems to be extremely good for me.
What are the chances that I can mount this bracelet directly to my Grand Premier? If not possible, what are the new prices of a pair of matching end links (I think that again 440A signed)? (Say Germany prices incl. VAT.)
An exact diameter data of the Old Navitimer case (so without the bezel) would help a lot too. Both bracelets have 22 mm interlug width of course.
I hope I could make my question clear. Thanks for any kind input!
Robert

_________________
Chronomat 41 BEB, Steelfish Chrono BEB, 2x Grand Premier, Chrono Cockpit 39 mm, Aerospace Avantage 79362
IWC 3706, 3705, 376706, 371928
Sinn 103 plexy
For sale: Sinn 356 II, Porsche Design Titan Chrono Valjoux
Wanted: Breitling Blackbird 13353 on bracelet

New info: end links that come with the steel/gold Navi have the number 423D.
(Moderators please, as the "Help" forum seems to be more alive than this, would you move, or even better copy my post there? Thx a lot!)

_________________
Chronomat 41 BEB, Steelfish Chrono BEB, 2x Grand Premier, Chrono Cockpit 39 mm, Aerospace Avantage 79362
IWC 3706, 3705, 376706, 371928
Sinn 103 plexy
For sale: Sinn 356 II, Porsche Design Titan Chrono Valjoux
Wanted: Breitling Blackbird 13353 on bracelet

Steelfish Pro 3 bracelet 162a end links as per BUK advice, works just fine on my fish


Sent from my iPhone using Tapatalk

Navitimer Olympus also 441A

_________________
Mat

Breitling Navitimer 01
Omega Seamaster 300mc
Omega Speedmaster Pro "Mitsukoshi Mod"
Seiko Prospek Orange Samurai