| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| Tool to adjust and or replace bracelets https://www.breitlingsource.com/phpBB2/viewtopic.php?f=6&t=257 |
Page 1 of 1 |
| Author: | Jerome [ Sun Jul 08, 2007 4:32 pm ] |
| Post subject: | Tool to adjust and or replace bracelets |
I have a small collection of watches and have been considering purchasing 3rd party straps and is wondering if there is a specific tool that I need to adjust and replace the bracelets. My collection consist of Oris, Omega, Tag and Breitlings. Specif models are list in my signature below. Any suggestion would be appreciated. |
|
| Author: | acceldebt [ Sun Jul 08, 2007 5:43 pm ] |
| Post subject: | |
Jerome, That's fine but don't let us catch you DEGRADING your Lings with straps. They must remain on bracelets. You've made it to the Whole Ling Club with the Super Avenger so don't transform it from a Whole Ling to a Degraded Ling. |
|
| Author: | Jerome [ Sun Jul 08, 2007 6:58 pm ] |
| Post subject: | |
Ling man, No need to worry about the Super Avenger, that will remain a full ling as long as its in my possession. I'm interested in swapping bracelets on my SuperOcean (Interested in a Breitling rubber strap) and a few other none Breitling. Proud member of the whole ling club 
|
|
| Author: | breitlingsource [ Mon Jul 09, 2007 8:48 am ] |
| Post subject: | |
I'd Recommend a Bergeon spring bar tool.. but any brand will probably do. A good one will be less likely to break and probably make it easier to not scratch your lugs. |
|
| Author: | Watchmakeress [ Mon Jul 09, 2007 3:45 pm ] |
| Post subject: | |
http://ads.auctionads.com/pagead/link_6 ... dZViewItem This is the one I usually use, or just a plain 1.00mm screwdriver... Be carefull, spring bars can fly far away! 
Vanessa |
|
| Author: | Jerome [ Mon Jul 09, 2007 6:14 pm ] |
| Post subject: | |
I was thinking about that, maybe we should come up with some type of a protective doom that you use to cover your hands and watch whenever your working with things like spring bars. Thanks for the recommendation I recently ordered one and will be picking it up tomorrow. |
|
| Author: | breitlingsource [ Tue Jul 10, 2007 8:45 am ] |
| Post subject: | |
Jerome wrote: protective doom
?? protective doom? 
If you want to protect your lugs you can put tape over them when you change straps/bracelets. |
|
| Author: | Jerome [ Tue Jul 10, 2007 1:13 pm ] |
| Post subject: | |
Thanks for the suggestions. Today I picked up a tool kit with all the appropriate parts required to fit and replace straps/bracelets. Thanks again for your valued input. |
|
| Author: | sportback [ Tue Jul 10, 2007 8:17 pm ] |
| Post subject: | |
breitlingsource wrote: Jerome wrote: protective doom ?? protective doom? If you want to protect your lugs you can put tape over them when you change straps/bracelets. I feel sure he meant 'dome'... |
|
| Author: | Jerome [ Wed Jul 11, 2007 4:53 am ] |
| Post subject: | |
Thanks for the correction Sportback! |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|