breitlingsource wrote:
Yeah, they are great for swirlies. Dremel is overdoing it and removes too much material for regular polishing.
Buy some Cods Brian! You won't regret it! 
| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| cape cod on gold https://www.breitlingsource.com/phpBB2/viewtopic.php?f=6&t=1393 |
Page 1 of 1 |
| Author: | kaje [ Thu Dec 27, 2007 10:41 pm ] |
| Post subject: | cape cod on gold |
Hi, do u guys think its safe to use the cape cod on a two-tone gold submariner?i recommended to someone he could,now a little concerned,will it take off some gold?? cheers |
|
| Author: | Altair [ Fri Dec 28, 2007 1:54 am ] |
| Post subject: | |
Worked fine on my mom's gold ring and my sisters white gold Chopard watch, no worries. |
|
| Author: | Driver8 [ Fri Dec 28, 2007 7:33 am ] |
| Post subject: | |
Yes Altair is right - it will be fine on a TT Submariner. Obviously they are very VERY slightly abrasivie, so I'd go a little careful on gold plate items, but a Rolex (with solid golds links) will be fine. Just a word of caution though - only use them on polished surfaces, NOT brushed finished areas! |
|
| Author: | Flynbyu [ Fri Dec 28, 2007 8:09 am ] |
| Post subject: | |
I'm thinking about buying some of these cloths. Will this remove the tiny swirl type scratches? I usually use a Dremel tool and a Dremel polish. I used to use Brasso but their new formula sucks. It seems my B-Ling picks up light swirls using my Dremel unlike my Fortis and Submariner. It's harder to keep it looking unworn like my others. ~Brian |
|
| Author: | Altair [ Fri Dec 28, 2007 8:53 am ] |
| Post subject: | |
Brian, They are excellent!! My Evo looks great! Highly recommend these cloths! |
|
| Author: | breitlingsource [ Fri Dec 28, 2007 12:48 pm ] |
| Post subject: | |
Yeah, they are great for swirlies. Dremel is overdoing it and removes too much material for regular polishing. |
|
| Author: | Driver8 [ Sat Dec 29, 2007 3:47 am ] |
| Post subject: | |
breitlingsource wrote: Yeah, they are great for swirlies. Dremel is overdoing it and removes too much material for regular polishing. Buy some Cods Brian! You won't regret it!
|
|
| Author: | Flynbyu [ Sat Dec 29, 2007 7:56 am ] |
| Post subject: | |
Thanks for the tips gang. I'm buying some online today. ~Brian |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|