| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| Chronomat bracelet? https://www.breitlingsource.com/phpBB2/viewtopic.php?f=29&t=68341 |
Page 1 of 1 |
| Author: | ThatZip [ Fri Mar 04, 2022 12:08 pm ] |
| Post subject: | Chronomat bracelet? |
Greetings, Which would be the correct bracelet to fit my Chronomat? Needless to say, I have purchased a 20mm genuine bracelet, which now does not fit, of course. Also, where might be the best place to find such a bracelet, at an affordable price? With thanks. |
|
| Author: | bnewbie [ Fri Mar 04, 2022 6:34 pm ] |
| Post subject: | Re: Chronomat bracelet? |
Here's some end link reference... viewtopic.php?f=29&t=42537 If it's Chronomat from 90ies and early 2000, most probably you need 300A end links. Ref# would be useful. |
|
| Author: | ThatZip [ Mon Mar 07, 2022 10:55 am ] |
| Post subject: | Re: Chronomat bracelet? |
My Chronomat is: B13050/B352. Needless to say, I purchased an used genuine Breitling bracelet and assumed that it would fit, because it was of the correct diameter. I should have known better. Could this bracelet be made to fit, with the correct end links? If so, where might I buy those? Thank you. |
|
| Author: | bnewbie [ Tue Mar 08, 2022 6:14 am ] |
| Post subject: | Re: Chronomat bracelet? |
Original bracelet would be Pilot bracelet marked CHRONO/DUO or CHRONO/DUOG on the end links. 300A should fit, as well as 301D if you prefer two tone bracelet. If you bought a Pilot bracelet you can keep it, just find matching end links. You can try on Chrono 24 or ebay. |
|
| Author: | ThatZip [ Tue Mar 08, 2022 7:57 am ] |
| Post subject: | Re: Chronomat bracelet? |
This is the bracelet which I mistakenly purchased:- BREITLING COLT PRO II BRUSHED BRACELET 20mm 812A Can this be made to fit, eg. with the correct end links? Thanks again. |
|
| Author: | bnewbie [ Tue Mar 08, 2022 8:12 am ] |
| Post subject: | Re: Chronomat bracelet? |
ThatZip wrote: This is the bracelet which I mistakenly purchased:- BREITLING COLT PRO II BRUSHED BRACELET 20mm 812A Can this be made to fit, eg. with the correct end links? Thanks again. I'm sorry, but you have a completely different bracelet Pro2 (for a different line of watches). You need a Pilot bracelet with end links markings I mentioned above. |
|
| Author: | ThatZip [ Tue Mar 08, 2022 8:15 am ] |
| Post subject: | Re: Chronomat bracelet? |
Okay, thank you for your advice, much appreciated. |
|
| Author: | bnewbie [ Tue Mar 08, 2022 8:17 am ] |
| Post subject: | Re: Chronomat bracelet? |
ThatZip wrote: Okay, thank you for your advice, much appreciated. No problem. Check on Chrono 24 with your model no., you'll see how Pilot bracelet looks like. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|