The Breitling Watch Source Forums
https://www.breitlingsource.com/phpBB2/

Help needed! Steel Bracelet identification
https://www.breitlingsource.com/phpBB2/viewtopic.php?f=29&t=46009		 Page 1 of 1
Author:  anirae [ Sun Mar 03, 2013 5:48 am ]
Post subject:  Help needed! Steel Bracelet identification
Hello everybody, this is my first post and let me congratulate you on how this forum is interesting! :)

well i'm comin to you because i just got a Navitimer 3100 New Pluton (80191) for a very cheap price, the watch itself appears to be a real genuine Breitling, but i cant find nothin about the bracelet that came with it?

here is a pic from Breitling New Pluton documentation.. my bracelet is exactly the same as the one on the pic except it's all Stainless Steel (no gold)...
Image

and here is mine ..

Image

Does any one know about the name and/or reference for this bracelet?
i cant find any serial number on it? is that normal? i know Breitling have been marking all their bracelet since 1990 but my watch is from the 1986 to 1989 period.. so ?? plus i've been checkin all the bracelet ref provided on your site and i cant find it...

if anyone could help with that i'll be grateful:)
Author:  Roffensian [ Sun Mar 03, 2013 6:11 am ]
Post subject:  Re: Help needed! Steel Bracelet identification
These are the very early modern bracelets and to the best of my knowledge never had a formal name or reference number.

Welcome to BreitlingSource.
Author:  vintage [ Sun Mar 03, 2013 6:13 am ]
Post subject:  Re: Help needed! Steel Bracelet identification
Does it have a 'B' on the buckle? The Navitimer 3100 should have three buttons vs the two in your pic and mine. This bracelet is the earlier version for the 2100.

Image
Author:  anirae [ Sun Mar 03, 2013 6:55 am ]
Post subject:  Re: Help needed! Steel Bracelet identification
yes it has a B on the buckle, and written "100% stainless steel" inside the buckle.. and yes of course my new pluton has 3 buttons..

What do you think would be a fair price for this bracelet, because i 'm planning to sell it.. ?
Author:  vintage [ Sun Mar 03, 2013 7:27 am ]
Post subject:  Re: Help needed! Steel Bracelet identification
anirae wrote:
yes it has a B on the buckle, and written "100% stainless steel" inside the buckle.. and yes of course my new pluton has 3 buttons..

What do you think would be a fair price for this bracelet, because i 'm planning to sell it.. ?


It's hard to put a price on these old bracelets because they rarely come up for sale and are only appropriate for this model watch so there's not that much demand. However, if you find the right person that's looking for one it could bring a good price. Best bet is to ebay it and get a little bidding war going for it.
Author:  anirae [ Sun Mar 03, 2013 10:43 am ]
Post subject:  Re: Help needed! Steel Bracelet identification
I know this bracelet is matchin all the Navitimer quartz series.. Pluton, New Pluton and Jupiter model, but i was wondering do you know if it fits on standards automatic navitimer? (i think it fits cause boxe are the same but not sure 100%)
Author:  Roffensian [ Sun Mar 03, 2013 11:01 am ]
Post subject:  Re: Help needed! Steel Bracelet identification
It won't, end links of Breitling bracelets are unique to fit the case.
Author:  anirae [ Sun Mar 03, 2013 11:11 am ]
Post subject:  Re: Help needed! Steel Bracelet identification
Roffensian wrote:
It won't, end links of Breitling bracelets are unique to fit the case.



yes i know that but both case are Navitimer arent they?
is there a difference between the case of an automatic navitimer compared to a quartz navitimer? (as far as the bracelet is conserned?)
Author:  Roffensian [ Sun Mar 03, 2013 11:21 am ]
Post subject:  Re: Help needed! Steel Bracelet identification
anirae wrote:
Roffensian wrote:
It won't, end links of Breitling bracelets are unique to fit the case.



yes i know that but both case are Navitimer arent they?
is there a difference between the case of an automatic navitimer compared to a quartz navitimer? (as far as the bracelet is conserned?)



Yes, the cases are different, the bracelet won't fit properly.
Author:  anirae [ Sun Mar 03, 2013 11:34 am ]
Post subject:  Re: Help needed! Steel Bracelet identification
Roffensian wrote:
anirae wrote:
Roffensian wrote:
It won't, end links of Breitling bracelets are unique to fit the case.



yes i know that but both case are Navitimer arent they?
is there a difference between the case of an automatic navitimer compared to a quartz navitimer? (as far as the bracelet is conserned?)



Yes, the cases are different, the bracelet won't fit properly.



Ok thank you for the info :D
I'm selling it for 150 euro.. seems good to me as i dont have no extra connectors to make the bracelet longer for a larger wrist (sorry for my english.. i'm french but i hope you understand)
Author:  Roffensian [ Sun Mar 03, 2013 1:35 pm ]
Post subject:  Re: Help needed! Steel Bracelet identification
If you are trying to sell it here then you need a thread in the sales section - viewforum.php?f=3, making sure that the thread complies with the sales rules listed there.
Author:  anirae [ Sun Mar 03, 2013 1:39 pm ]
Post subject:  Re: Help needed! Steel Bracelet identification
Roffensian wrote:
If you are trying to sell it here then you need a thread in the sales section - viewforum.php?f=3, making sure that the thread complies with the sales rules listed there.



No dont worry i'm not tryin to sell it here.. was just talkin about a fair price...
i'm in France, and it's for sell on a french forum at the moment.. i'll be leavin pretty soon for holiday, so 'ill put the bracelet for sale here and some other forum when i'll be back...

:)
Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/