The Breitling Watch Source Forums

I have a 2002 Aerospace ti/gold model #F75362...it comes with the aerospace bracelet with gold links...

My question is can a utc module be added to this bracelet or do i have to buy a complete aerospace bracelet with utc?...

For this to work, the utc module would have to have an attached link on the 6 o'clock side for the links to attach...since the aerospace bracelet tapers from 20mm at the lugs to 18mm, it would seem that there needs to be an included attachment link for the standard bracelet links...

Is this doable?...or do i have to find/buy a complete aerospace bracelet with utc module...

I have seen a 1999 Aerospace model # F65362 which comes with a utc module on it's bracelet...the utc module model # F61172 is printed on the utc caseback...i would assume this bracelet could be taken off the F65362 and added to the F75362, right?...

but i guess the easy thing, if it can be done, is to find a F61172 utc module and attachment link, if it would work?!...

any help would be appreciated...

and yes, i realize the utc module for this Aerospace was discontinued in 2005...

R-

Welcome aboard.
You have 104F and need 800F for TT.

does that mean i need to replace my 104f bracelet with an entire 800f?...

i assume the utc module cannot be added to my 104f bracelet, correct?...

thanks!...R

No, the UTC can't be added on a 104F.
Not sure if you could just put 800F end link to a 104F.
If that can't be done, you are going to need a whole 800F.

i was thinking that it could be added, assuming you had the link that attaches at the 6 o'clock utc "lug"...i links on a "regualr" aerospace bracelet are 18mm...so i think if you had the utc 6 o'clock end link it might work...this link i think is 17mm at the connection point and then you would attach the normal 18mm links...not sure, though...

either way, i think it must be pretty tough to find just the module and this link...so a complete bracelet would be needed...i don't know that for sure...

if someone has this bracelet with utc module and wants to sell it, please contact me...

R-