P.S
The turning method has not worked
| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| My Breitling has Stopped!!! https://www.breitlingsource.com/phpBB2/viewtopic.php?f=12&t=52725 |
Page 1 of 2 |
| Author: | Oliveroates38 [ Sun Mar 09, 2014 10:31 am ] |
| Post subject: | My Breitling has Stopped!!! |
Hello please can someone help me, I my dad gave me a Breitling for Bentley a few weeks ago but I did not know you had to wind it up and I have just been shaking it to get it working. It has now not working at all I have tried shaking it and winding it but no joy the chronometer or the second hand will not work. Is it something I can fix but will I have to send it to Breitling for a service ???? |
|
| Author: | saabreit [ Sun Mar 09, 2014 10:38 am ] |
| Post subject: | Re: My Breitling has Stopped!!! |
Oliveroates38 wrote: Hello please can someone help me, I my dad gave me a Breitling for Bentley a few weeks ago but I did not know you had to wind it up and I have just been shaking it to get it working. It has now not working at all I have tried shaking it and winding it but no joy the chronometer or the second hand will not work. Is it something I can fix but will I have to send it to Breitling for a service ???? Breitling for Bentley is a modern watch, not at its place in the vintage section . Are you sure it is a real Breitling? With any automatic watch, shaking it would bring it back to life and you would see the small second sweephand moving. |
|
| Author: | Roffensian [ Sun Mar 09, 2014 10:55 am ] |
| Post subject: | Re: My Breitling has Stopped!!! |
Well yes, but shaking a watch is not a recommended activity to wind the watch - winding it with the crown is much preferable and excessive shaking could cause any kind of damage. I suspect that when the OP refers to the 'chronometer hand' he actually means the chronograph hand which may not run unless the chronograph is activated. OP, after winding it (not shaking it) do any of the subdial hands move? |
|
| Author: | Oliveroates38 [ Sun Mar 09, 2014 12:30 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
Thanks for the help, but I have no idea what to do. What is the correct way to wind a Breitling, I don't want to |
|
| Author: | Oliveroates38 [ Sun Mar 09, 2014 12:31 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
carry on from last message.... wind it more incase I damage it. Is there anything I can do. |
|
| Author: | Roffensian [ Sun Mar 09, 2014 12:33 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
You can't damage a watch by winding it. Unscrew the crown by holding it in your left hand and turning the crown towards you with your right finger and thumb. When the crown pops out to the first position it can be wound by turning it away from you. Give it at least 40 turns and then screw the crown back down by pushing it against the case while turning the crown away from you. Then tell us what if anything is moving. |
|
| Author: | Oliveroates38 [ Sun Mar 09, 2014 12:42 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
Nothing is moving at all the small second hand is not moving and I can't get the big chronometer to work. Thanks so much for your help |
|
| Author: | Roffensian [ Sun Mar 09, 2014 12:58 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
OK, so one last thing to try. Hold the watch upright and slowly rotate it through 360 degrees - i.e. looking at the dial turn it so that the 12 o'clock position is at 9, 6, 3 and then back to 12. If the watch is out of beat that will get it working, if not then it will need Breitling service attention. Excessive shaking of the watch could have caused any number of potential issues. |
|
| Author: | Oliveroates38 [ Sun Mar 09, 2014 1:19 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
Thank you but I'm not sure what you mean |
|
| Author: | Roffensian [ Sun Mar 09, 2014 1:21 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
Oliveroates38 wrote: Thank you but I'm not sure what you mean Which part? |
|
| Author: | Oliveroates38 [ Sun Mar 09, 2014 1:44 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
If what you mean I have held my breiting up right and turned it 360 degrees. Is there anything else you would recommend doing, because Breitling service's are jolly expensive. Thanks for your help |
|
| Author: | Oliveroates38 [ Sun Mar 09, 2014 1:46 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
P.S The turning method has not worked
|
|
| Author: | BoneDoc [ Sun Mar 09, 2014 2:07 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
Sounds like a trip to your local Authorized Breitling dealer is in order. Check the Breitling website for the nearest one. Good luck!  http://www.breitling.com/en/retailers/list/ |
|
| Author: | Roffensian [ Sun Mar 09, 2014 2:33 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
Oliveroates38 wrote: If what you mean I have held my breiting up right and turned it 360 degrees. Is there anything else you would recommend doing, because Breitling service's are jolly expensive. Thanks for your help Take it to an AD to get them to look at it. If winding isn't working then something is wrong with it, likely caused by the fact that you kept shaking it. You might also want to try posting pictures of it just to make sure that it's real. |
|
| Author: | TomP [ Sun Mar 09, 2014 4:03 pm ] |
| Post subject: | Re: My Breitling has Stopped!!! |
Roffensian wrote: You might also want to try posting pictures of it just to make sure that it's real. I confess I did have that thought - there are a lot of Bentley fakes out there. Would hope to be wrong of course. |
|
| Page 1 of 2 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|