Springbar Tool is the very same, go for it!
The screwdriver set is quite expensive for all that it is although it will do the job. I'm sure you could get a similar set for much less than that at your local DIY store.
| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| Tools https://www.breitlingsource.com/phpBB2/viewtopic.php?f=12&t=4103 |
Page 1 of 2 |
| Author: | In2Deep [ Thu Jul 24, 2008 6:14 pm ] |
| Post subject: | Tools |
Which specific tools should I be looking for? I'd like to pick up the proper tools to change straps, bracelets bezels etc. |
|
| Author: | aleister [ Thu Jul 24, 2008 10:40 pm ] |
| Post subject: | |
With the Bergeon 6767F springbar tool and a set of fine/very fine jewellers screwdrivers you should be all set. |
|
| Author: | andrew692003 [ Thu Jul 24, 2008 11:01 pm ] |
| Post subject: | |
I recently bought a Bergeon 6767F Spring Bar tool for £8.40 or $16.67 from watchtool.co.uk, I think you can also get them from ebay. As you can see from my pics the tool worked a treat, perfect for removing the pins on both my watch straps so you should have no bother with that. I also bought a set of precision screwdrivers from the local DIY shop for removing links on my ProII strap which worked a treat! Hope this helps. Cheers Andrew |
|
| Author: | In2Deep [ Thu Jul 24, 2008 11:34 pm ] |
| Post subject: | |
OK, I believe I have found both, my only question is whether the Screwdriver set has the sizes I will need. Please take a look: Sprinbar Tool http://www.mywatchmaker.net/springbartool.htm Screw Driver Set http://cgi.ebay.com/Bergeon-4840-Non-Magnetic-Screwdriver-Set_W0QQitemZ310069056963QQihZ021QQcategoryZ10363QQrdZ1QQssPageNameZWD1VQQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247 |
|
| Author: | andrew692003 [ Fri Jul 25, 2008 4:25 am ] |
| Post subject: | |
Springbar Tool is the very same, go for it! The screwdriver set is quite expensive for all that it is although it will do the job. I'm sure you could get a similar set for much less than that at your local DIY store.
|
|
| Author: | andrew692003 [ Fri Jul 25, 2008 4:27 am ] |
| Post subject: | |
Springbar Tool is the very same, go for it! The screwdriver set is quite expensive for all that it is although it will do the job. I'm sure you could get a similar set for much less than that at your local DIY store.
|
|
| Author: | RJRJRJ [ Fri Jul 25, 2008 10:10 am ] |
| Post subject: | |
I find a 1.4mm screwdriver to work best. |
|
| Author: | Breitling Bloke [ Fri Jul 25, 2008 10:37 am ] |
| Post subject: | |
Spring bar tool is spot on. I got this set of screwdrivers - they're excellent. http://www.watchtool.co.uk/piece-screwd ... -6797.html Spare blades, the lot! |
|
| Author: | In2Deep [ Fri Jul 25, 2008 8:21 pm ] |
| Post subject: | |
Perfect, thanks guys. =] |
|
| Author: | Watchmakeress [ Fri Jul 25, 2008 10:42 pm ] |
| Post subject: | |
In2Deep wrote: OK, I believe I have found both, my only question is whether the Screwdriver set has the sizes I will need. Please take a look:
Sprinbar Tool http://www.mywatchmaker.net/springbartool.htm Screw Driver Set http://cgi.ebay.com/Bergeon-4840-Non-Magnetic-Screwdriver-Set_W0QQitemZ310069056963QQihZ021QQcategoryZ10363QQrdZ1QQssPageNameZWD1VQQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247 This screwdriver set won't do you any good, they're too small. You should go for red, gray and purple if you want Bergeon. |
|
| Author: | In2Deep [ Fri Jul 25, 2008 10:54 pm ] |
| Post subject: | |
Watchmakeress wrote: In2Deep wrote: OK, I believe I have found both, my only question is whether the Screwdriver set has the sizes I will need. Please take a look: Sprinbar Tool http://www.mywatchmaker.net/springbartool.htm Screw Driver Set http://cgi.ebay.com/Bergeon-4840-Non-Magnetic-Screwdriver-Set_W0QQitemZ310069056963QQihZ021QQcategoryZ10363QQrdZ1QQssPageNameZWD1VQQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247 This screwdriver set won't do you any good, they're too small. You should go for red, gray and purple if you want Bergeon. I can't make out the colors on eBay, what sizes would those be? |
|
| Author: | Watchmakeress [ Sat Jul 26, 2008 5:42 pm ] |
| Post subject: | |
Sorry... 1.20mm, 1.40mm and 1.60mm. You might want to get the black (1mm) as well for smaller stuff, but most Breitling bracelets have pretty large screws. |
|
| Author: | In2Deep [ Sat Jul 26, 2008 6:45 pm ] |
| Post subject: | |
Excellent, thanks for the help. I'll start hunting for them 
|
|
| Author: | aleister [ Sun Jul 27, 2008 11:07 pm ] |
| Post subject: | |
The screwdriver set BB recommended is great, I can only agree! |
|
| Author: | Damian [ Wed Aug 20, 2008 2:41 pm ] |
| Post subject: | |
I've just bought a Bergeon 6767F springbar tool, the quality is second-to-none |
|
| Page 1 of 2 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|