| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| Broken Rotor on Super Avenger https://www.breitlingsource.com/phpBB2/viewtopic.php?f=12&t=37937 |
Page 1 of 1 |
| Author: | Sequoia [ Tue Mar 06, 2012 4:04 am ] |
| Post subject: | Broken Rotor on Super Avenger |
I have a Super avenger that recently started making a clanking sound. When I removed the back I found that the rotor was in two pieces. The weight was separated from actual rotor. Is this common? I didn't realize the rotor was two separate pieces. How do these pieces stay together? I am assuming some kind of glue but not sure. Any advice would be appreciated. I will be taking it to my jeweler but wanted to be able to talk with knowledge when I bring it in. Thanks, |
|
| Author: | Roffensian [ Tue Mar 06, 2012 5:07 am ] |
| Post subject: | Re: Broken Rotor on Super Avenger |
Not common, never heard of it before. Sounds like a parts failure and should be an easy fix. |
|
| Author: | Iantheklutz [ Tue Mar 06, 2012 6:40 am ] |
| Post subject: | Re: Broken Rotor on Super Avenger |
Also, maybe don't mention that you took the caseback off... If you still have a warranty, that bit of information will surely void any possibility of Breitling covering the repair costs. |
|
| Author: | Sequoia [ Tue Mar 06, 2012 7:23 am ] |
| Post subject: | Re: Broken Rotor on Super Avenger |
Regretfully the watch is no longer under warranty as it is around 5 years old. I have noticed some other watch rotors with a similiar appearance that are two pieces. Mine was grooved so the weight fits into the centered rotor piece & assumed to be glued together. Hopefully a quick fix. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|