The Breitling Watch Source Forums
https://www.breitlingsource.com/phpBB2/

Aerospace - help with synching please?
https://www.breitlingsource.com/phpBB2/viewtopic.php?f=12&t=32755		 Page 1 of 1
Author:  zog [ Thu Aug 18, 2011 7:30 pm ]
Post subject:  Aerospace - help with synching please?
Hello - new to the forum.

I have a new-to-me Aerospace F 56059 L. Was working perfectly but today I changed the time by 15 hours and when finished the hands do not match the digital display. About 2 minutes off.

I have downloaded a manual and have read whatever I could find on this forum. Apparently I should see an "R" in the left hand of the top window which indicates synching mode. However as I wind through the modes I don't get an "R" and am not able to synch the hands to the digital.

Unable to get my answer on other threads - can someone please advise?

Thanks in advance
Author:  Goblin [ Fri Aug 19, 2011 2:07 am ]
Post subject:  Re: Aerospace - help with synching please?
Hey there....

Here is how to: flip the crown to show "normal time", then pull out the crown. Now the "R" should be visible.

Hope this helps!

//
Author:  zog [ Fri Aug 19, 2011 5:15 am ]
Post subject:  Re: Aerospace - help with synching please?
Thanks Goblin for the quick answer!!

I figured it out but not quite like you said - maybe my model is flawed or different. When I pulled the crown I did not get an "R".

I rotated the crown past the "normal time" until both displays went blank - that turned out to be "synch" mode.
In that mode, the digits lit up when I rotated the crown.

SYNCH MODE

Image


SYNCHED:


Image
Author:  Goblin [ Sat Aug 20, 2011 5:07 am ]
Post subject:  Re: Aerospace - help with synching please?
Yes, I stand corrected. Both displays should be blank.

//
Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/