| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| Bentley 6.75 not working! https://www.breitlingsource.com/phpBB2/viewtopic.php?f=12&t=30208 |
Page 1 of 1 |
| Author: | Prettibwoy [ Sun May 15, 2011 5:46 am ] |
| Post subject: | Bentley 6.75 not working! |
I set the time and date yesterday and today and the watch does not move. I pressed the buttons to make the seconds hand move and nothing. I have never bumped the watch and have only had it less than a year and I bought it brand new! Some one help please!!!! |
|
| Author: | bnewbie [ Sun May 15, 2011 5:54 am ] |
| Post subject: | Re: Bentley 6.75 not working! |
Welcome aboard. Did you try to wind it manually? |
|
| Author: | Prettibwoy [ Sun May 15, 2011 8:30 am ] |
| Post subject: | Re: Bentley 6.75 not working! |
Yea I did for about 6 minutes and still nothing |
|
| Author: | Roffensian [ Sun May 15, 2011 8:40 am ] |
| Post subject: | Re: Bentley 6.75 not working! |
It may simply be out of beat. Hold the watch facing you with the crown screwed in and rotate it through 360 degrees - i.e. turn the watch so htat the crown moves from 3 to 6, 9, 12, etc If that doesn't work then there may be something more serious wrong with the watch. You say that you set time and date yesterday - was the watch running when you did that and has stopped as a result of you making the change? If so then it's possible that there is a problem with the crown stem and it's not allowing the watch to start running again - unscrew the crown and pull it out to the time setting position and then push it back in and screw it down again to see if that makes it work. If not, then it likely needs a trip to Breitling. |
|
| Author: | Prettibwoy [ Sun May 15, 2011 9:00 am ] |
| Post subject: | Re: Bentley 6.75 not working! |
I'm confused. If the crown is screwed in how can I rotate the hands from 3, 6 9 to 12? |
|
| Author: | Roffensian [ Sun May 15, 2011 9:11 am ] |
| Post subject: | Re: Bentley 6.75 not working! |
Prettibwoy wrote: I'm confused. If the crown is screwed in how can I rotate the hands from 3, 6 9 to 12? I never said rotate the hands, I said rotate the watch |
|
| Author: | Prettibwoy [ Sun May 15, 2011 9:21 am ] |
| Post subject: | Re: Bentley 6.75 not working! |
Ok I tried that an still nothing! Fml! I'm in nyc can I just walk it into tourNeau? |
|
| Author: | Roffensian [ Sun May 15, 2011 9:26 am ] |
| Post subject: | Re: Bentley 6.75 not working! |
Prettibwoy wrote: I'm in nyc can I just walk it into tourNeau? Yes, just take your warranty card with you. |
|
| Author: | Prettibwoy [ Sun May 15, 2011 9:31 am ] |
| Post subject: | Re: Bentley 6.75 not working! |
Ok will do. |
|
| Author: | Stefan Tapp [ Mon May 16, 2011 7:58 am ] |
| Post subject: | Re: Bentley 6.75 not working! |
Prettibwoy wrote: Ok will do. Better still take it to the Breitling Boutique on 5th and 57th East, they have an in house repair centre and may be able to do it there. Stef |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|