The Breitling Watch Source Forums
https://www.breitlingsource.com/phpBB2/

Not again! Winders?
https://www.breitlingsource.com/phpBB2/viewtopic.php?f=12&t=23828		 Page 1 of 1
Author:  breanach78 [ Fri Oct 22, 2010 11:47 am ]
Post subject:  Not again! Winders?
I have a Chronomat on my double winder that keep it wound perfect for me. 100% happy with the settings so won't bore you with that..
Now the issue is the Chronomat is set to wind CW only which is correct (CW) but I have a new SO bought and was wondering, given the the B17 calibre winds both directions, is it ok wind the SO in one direction only, that been CW as the B17 winds both directions or would that harm the movement in any way as it only be getting wound in one direction(CW)? ? ?

So put simply is it OK to wind the B17 Constantly in one direction?

Wrist time will be very limited as I rotate my watches and due to work only ware them socializing or put another way drinking!!! :lol:
Author:  bnewbie [ Fri Oct 22, 2010 1:06 pm ]
Post subject:  Re: Not again! Winders?
breanach78 wrote:
So put simply is it OK to wind the B17 Constantly in one direction?

I don't see a problem in that as long as it gets enough turns.
Author:  sharkman [ Fri Oct 22, 2010 1:28 pm ]
Post subject:  Re: Not again! Winders?
Yes, it winds fully in either direction - doesn't need to wind both ways.
Author:  breanach78 [ Fri Oct 22, 2010 1:42 pm ]
Post subject:  Re: Not again! Winders?
Ok. So its no harm to wind it only one direction. Give that I think that the Chronomat is 650tpd and the SO is 800tpd, any harm to up, and in the process over wind the chronomat, to 800tpd? :huh
Author:  sharkman [ Fri Oct 22, 2010 1:54 pm ]
Post subject:  Re: Not again! Winders?
No - perhaps some virtually unmeasurable wear.
Author:  Roffensian [ Fri Oct 22, 2010 4:02 pm ]
Post subject:  Re: Not again! Winders?
It's actually the other way round - SO is 650, Chronomat is 800.

As has been said (and said in previous threads) both just means either. In reality 800tpd on a winder vs. 650 needed is going to be less than if the watch was worn so it's completely irrelevant.

I've been thinking about tyring to write a 'definitive' guide to watchwinders, I'll try and find the time.
Author:  JustinFournier [ Fri Oct 22, 2010 5:44 pm ]
Post subject:  Re: Not again! Winders?
I'll help if you need something Roff, I about did a thesis on them before I bought mine.
Author:  bnewbie [ Sat Oct 23, 2010 5:33 am ]
Post subject:  Re: Not again! Winders?
breanach78 wrote:
over wind the chronomat

You can't over wind an Auto.
Author:  Optik22 [ Wed Oct 27, 2010 8:42 am ]
Post subject:  Re: Not again! Winders?
So it is always better to set the winder to make axtra turns.
Author:  Roffensian [ Wed Oct 27, 2010 8:57 am ]
Post subject:  Re: Not again! Winders?
Optik22 wrote:
So it is always better to set the winder to make axtra turns.



Already posted this in the other thread with your winder questions - viewtopic.php?f=6&t=23867
Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/