Everything has now stopped; the sub dial at 3, the main hours hand (attached to the centre) and the main minutes hand (attached to the centre). So i have now put it back in the leather case and left it for the day due to young frustration
| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| New Breitling for bentley motors T https://www.breitlingsource.com/phpBB2/viewtopic.php?f=12&t=22623 |
Page 1 of 1 |
| Author: | glynd_92 [ Sat Sep 11, 2010 2:58 am ] |
| Post subject: | New Breitling for bentley motors T |
Hi guys Just bought my first breitling at the young age of 18. I have set the time and date to how the manual specifies, but the hands are still not moving? Why is this? And i have been told to buy a watch winder, any ideas? many regards p.s. pictures uploaded shortly |
|
| Author: | john123 [ Sat Sep 11, 2010 4:35 am ] |
| Post subject: | Re: New Breitling for bentley motors T |
Did you wind the watch? |
|
| Author: | glynd_92 [ Sat Sep 11, 2010 5:49 am ] |
| Post subject: | Re: New Breitling for bentley motors T |
i followed the instructions below: 1) unscrew the water-resistant crown in an anti-clockwise direction. wind the watch by 40 times clockwise turns of the crown. 2) pull the crown out to position 2, turn it anti-clock wise to adjust the calendar to the day prior to the date it is set into operation. 3) pull the crown out to position 3. turn the hands so as to make the calendar jump once when the hands pass through midnight. then adjust the hour and minute. 4) push the crown back to position 1. press it gently, turning it gently in a clockwise direction, then tighten it again until you feel some resistance. Do not force! Those are the instructions that i followed |
|
| Author: | Roffensian [ Sat Sep 11, 2010 6:25 am ] |
| Post subject: | Re: New Breitling for bentley motors T |
glynd_92 wrote: i followed the instructions below: 1) unscrew the water-resistant crown in an anti-clockwise direction. wind the watch by 40 times clockwise turns of the crown. 2) pull the crown out to position 2, turn it anti-clock wise to adjust the calendar to the day prior to the date it is set into operation. 3) pull the crown out to position 3. turn the hands so as to make the calendar jump once when the hands pass through midnight. then adjust the hour and minute. 4) push the crown back to position 1. press it gently, turning it gently in a clockwise direction, then tighten it again until you feel some resistance. Do not force! Those are the instructions that i followed I just answered your PM before reading this. If the running seconds hand is not running (subdial at 3), then rotate the watch through 360 degrees as you look at it (i.e. looking at the dial turn the watch so that the 12 moves through the 3, 6 and 9 position. That should get it running if it is out of beat and not starting on its own. If that doesn't work then take it back to the AD. |
|
| Author: | glynd_92 [ Sat Sep 11, 2010 6:46 am ] |
| Post subject: | Re: New Breitling for bentley motors T |
The sub dial at 3 is running. But Nothing else is running, i.e. the other two sub dials at 6 and 9, and the seconds hand is not running. |
|
| Author: | glynd_92 [ Sat Sep 11, 2010 6:59 am ] |
| Post subject: | Re: New Breitling for bentley motors T |
Its alive! Its working like a dream now, thanks alot for the advice. |
|
| Author: | Roffensian [ Sat Sep 11, 2010 9:08 am ] |
| Post subject: | Re: New Breitling for bentley motors T |
glynd_92 wrote: The sub dial at 3 is running. But Nothing else is running, i.e. the other two sub dials at 6 and 9, and the seconds hand is not running. But the hour and minute hands are running. The only bits that aren't running are the chronograph hands, and if it is now "alive" because those hands are running then that's the chronograph that's running now - read that part of the manual. |
|
| Author: | glynd_92 [ Sat Sep 11, 2010 9:53 am ] |
| Post subject: | Re: New Breitling for bentley motors T |
I had everything working as it should. The chronograph set and reset as it should. THEN...the time was 5 minutes out according to sky, so i adjusted it then it stopped operating again. Can you overwind the watch? |
|
| Author: | Roffensian [ Sat Sep 11, 2010 9:58 am ] |
| Post subject: | Re: New Breitling for bentley motors T |
glynd_92 wrote: I had everything working as it should. The chronograph set and reset as it should. THEN...the time was 5 minutes out according to sky, so i adjusted it then it stopped operating again. Can you overwind the watch? You can't over wind an automatic. What stopped? You said that the sub seconds is running, is that still the case (the one at 3 o'clock)? What about the main hour and minute hands (the ones attached to the centre of the watch? |
|
| Author: | glynd_92 [ Sat Sep 11, 2010 11:35 am ] |
| Post subject: | Re: New Breitling for bentley motors T |
Everything has now stopped; the sub dial at 3, the main hours hand (attached to the centre) and the main minutes hand (attached to the centre). So i have now put it back in the leather case and left it for the day due to young frustration
|
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|