| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| b-1 Bezel Loose https://www.breitlingsource.com/phpBB2/viewtopic.php?f=12&t=19859 |
Page 1 of 1 |
| Author: | 737Driver [ Sat Jun 05, 2010 4:06 am ] |
| Post subject: | b-1 Bezel Loose |
G'Day Crew, I have noticed that the bezel on my new B-1 moves a fair bit (not when rotating,obviously), is it the tiny little screws that hold it in place? I might take it into breitling Oz and get their professional opinion. Any idea's though? Regards, Rob |
|
| Author: | Driver8 [ Sat Jun 05, 2010 4:19 am ] |
| Post subject: | Re: b-1 Bezel Loose |
There usually is a bit of play in the B-1 bezel as there is in all bezels that work with a rack and pinion mechanism. The Motors models, the Airwolf, the Skyracer etc are all the same, so a little play is normal. I guess it depends how much play you have in it. If it's more than a mm or so in either direction then you may have an issue. Without seeing it it's hard to say unfortunately. Might be worth nipping it into an AD for peace of mind. |
|
| Author: | Alan M [ Sat Jun 05, 2010 4:49 am ] |
| Post subject: | Re: b-1 Bezel Loose |
Rob, Mine was/is the same maybe .5-.75 of play. It is normal as said. |
|
| Author: | 737Driver [ Sun Jun 06, 2010 3:55 pm ] |
| Post subject: | Re: b-1 Bezel Loose |
Thanks guys, As you said only about 0.5 - 0.75mm in movement, suppose I am just used to straight forward bezels on divers etc. which rotate in one direction and not mechanical in any way. Thank you for the posts and saving my sanity........... Regards, Rob |
|
| Author: | Alan M [ Sun Jun 06, 2010 11:38 pm ] |
| Post subject: | Re: b-1 Bezel Loose |
I think if you looked back a year and a half ago I posted the same question. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|