| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| Quick question... setting Emergency to 24hr https://www.breitlingsource.com/phpBB2/viewtopic.php?f=12&t=18899 |
Page 1 of 1 |
| Author: | thenotoriousrob [ Fri Apr 30, 2010 4:31 am ] |
| Post subject: | Quick question... setting Emergency to 24hr |
I had my Emergency sent in for battery replacement last week (somehow no charge!) and they set the watch back with the default am/pm setting. I've packed my manuals (in the process of moving) and cannot figure out how to set this back to 24hr. In the normal time mode, pulling the crown out causes hrs:mins to blink. Rotating changes time and pushing in switches to blinking seconds. Pushing in again takes the watch out of setting mode. I've tried setting with the dial set to the blank screen as well (with the R in the top window) but I think that it for minor time coordination adjustments. Any help would be appreciated. Great site by the way, it's very tough to find help on breitlings on the internet. |
|
| Author: | Roffensian [ Fri Apr 30, 2010 5:07 am ] |
| Post subject: | Re: Quick question... setting Emergency to 24hr |
Don't have an Emergency so can't help you on the 24 hours, but someone will be along soon. The reason for the free battery was that Emergency / Emergency Mission include a free first service. And welcome to BreitlingSource! |
|
| Author: | Shel [ Sun May 02, 2010 9:36 pm ] |
| Post subject: | Re: Quick question... setting Emergency to 24hr |
Notorious On the Airwolf (just got my Airwolf Raven yesterday!!!), if you put the watch into "Time" display mode, then press the upper pusher, it should switch from am/pm to 24 hour time. I don't remember if you press the upper pusher, or press and hold, but try both. Again, set the watch to display the current time, leave the crown alone, and press (or press and hold) the upper pusher. Hope this helps, again, this is for an Airwolf, but worth a try! |
|
| Author: | thenotoriousrob [ Mon May 03, 2010 5:16 am ] |
| Post subject: | Re: Quick question... setting Emergency to 24hr |
Thanks Shel, but no upper button on the Emergency, just the crown. Tried finding the manual online to no avail. Tried everything in time and date modes, still can't figure this out and I know it's something so ridiculously easy. Might have to take a trip to the dreaded mall to see if someone at Tourneau knows. I will post a reply if I get this before someone else on here. |
|
| Author: | challenger_fr [ Tue May 04, 2010 2:13 am ] |
| Post subject: | Re: Quick question... setting Emergency to 24hr |
Hello, To change between 24H am/pm time, do that: Select the T2 (2nd timezone) function by rotating the crown press once on the crown: if the letter A or P is displayed, the time readout is in the 2*12H mode To change the time display mode, press on the crown twice. Hope that it will help you. I have the Emergency Manual, send me a PM if you want some more information. Regards, 
|
|
| Author: | thenotoriousrob [ Tue May 04, 2010 3:58 am ] |
| Post subject: | Re: Quick question... setting Emergency to 24hr |
Solved! Thank you, I tried pushing the crown in the normal time zone, but didn't bother to try it in T2. I was convinced I'd have to pull the crown to make any adjustments. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|