| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| Screwdriver size for SuperAvenger? https://www.breitlingsource.com/phpBB2/viewtopic.php?f=12&t=16019 |
Page 1 of 1 |
| Author: | The Toecutter [ Tue Jan 19, 2010 8:53 pm ] |
| Post subject: | Screwdriver size for SuperAvenger? |
I've done a search and read that it's 1.8mm. The one I have, the blade of the screwdriver is too thick to fit in the slot and turn the screw. Is it really 1.8mm? |
|
| Author: | Driver8 [ Wed Jan 20, 2010 2:19 am ] |
| Post subject: | Re: Screwdriver size for SuperAvenger? |
Yes it is 1.8mm if you use a proper watch watchmaking screwdriver such as a Bergeon. Chances are that if it's just a small screwdriver (or a cheap watchmaking screwdriver) as opposed to a proper watchmaking screwdriver by a decent make, then the blade may well be less fine and hence not fit. What make is it you are using? |
|
| Author: | The Toecutter [ Wed Jan 20, 2010 5:10 am ] |
| Post subject: | Re: Screwdriver size for SuperAvenger? |
It's a cheap one. I'd buy a Bergeon 1.8mm in a second, but I can't find one. Any alternatives out there? |
|
| Author: | Roffensian [ Wed Jan 20, 2010 5:51 am ] |
| Post subject: | Re: Screwdriver size for SuperAvenger? |
The Toecutter wrote: It's a cheap one. I'd buy a Bergeon 1.8mm in a second, but I can't find one. Any alternatives out there? Bergeon 160 (1.6mm). |
|
| Author: | Sparwood [ Wed Jan 20, 2010 6:58 am ] |
| Post subject: | Re: Screwdriver size for SuperAvenger? |
I just bought the 1.6mm from chronoworld.com, they sell them individually $11.00 each plus $6 shipping, they also sell the 6767F springbar tool for $17. Didn't realize they ship from Japan until I got the confirmation email though...... |
|
| Author: | Zirotti [ Wed Jan 20, 2010 7:50 am ] |
| Post subject: | Re: Screwdriver size for SuperAvenger? |
Man, see if you can cancel the order. You're best bet is Otto Frei, and I believe they ship from Canada and their are cheaper. The 160 is $8 there. http://www.ofrei.com/page1361.html |
|
| Author: | Roffensian [ Wed Jan 20, 2010 8:21 am ] |
| Post subject: | Re: Screwdriver size for SuperAvenger? |
Zirotti wrote: Man, see if you can cancel the order. You're best bet is Otto Frei, and I believe they ship from Canada and their are cheaper. The 160 is $8 there. http://www.ofrei.com/page1361.html They are in California, not Canada. |
|
| Author: | Sparwood [ Wed Jan 20, 2010 12:42 pm ] |
| Post subject: | Re: Screwdriver size for SuperAvenger? |
Zirotti wrote: Man, see if you can cancel the order. You're best bet is Otto Frei, and I believe they ship from Canada and their are cheaper. The 160 is $8 there. http://www.ofrei.com/page1361.html Well my wife is in Tokyo for a week and I ordered the screwdriver while I balanced my 6 month old on my knee and played cars with my 2 year old with the other hand so 3 bucks is the least of my worries today 
|
|
| Author: | Zirotti [ Wed Jan 20, 2010 1:35 pm ] |
| Post subject: | Re: Screwdriver size for SuperAvenger? |
I was just saying in regards to shipping and wait time... |
|
| Author: | Sparwood [ Wed Jan 20, 2010 7:43 pm ] |
| Post subject: | Re: Screwdriver size for SuperAvenger? |
Zirotti wrote: I was just saying in regards to shipping and wait time... No worries, actually shipping was not bad, they said 5-8 days, I guess we'll see when it shows up. I will check out the website you suggested as well for interest. On a side note I noticed you're from Grand Rapids, my brother used to play hockey there for the Griffins a couple of years ago. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|