The Breitling Watch Source Forums
https://www.breitlingsource.com/phpBB2/

Dial Breitling Bullhead chrono-matic ref. 2117
https://www.breitlingsource.com/phpBB2/viewtopic.php?f=11&t=60344
Page 1 of 1

Author:  Watchjacco [ Fri Apr 22, 2016 2:28 am ]
Post subject:  Dial Breitling Bullhead chrono-matic ref. 2117

Hi guys,

I'm a first-timer on your great Breitling forum. I just drop my question and would appriciate any help. I'm looking for a dial of a Breitling Bullhead ref. 2117 chronomatic, the blue version. I have the dial of a handwinder in my chrono-matic, so that's not right. So maybe some hints on how to get the right dial? I know it won't be easy, but I'll try anyways..

Thanks a lot.

Best regards,
Jacco (from the Netherlands)

Author:  WatchFred [ Fri Apr 22, 2016 4:47 am ]
Post subject:  Re: Dial Breitling Bullhead chrono-matic ref. 2117

welcome to the forum, Jacco, but ....
sorry to say, that is by far the smallest issue here.
all hands are incorrect as is the date wheel.

Author:  Watchjacco [ Fri Apr 22, 2016 4:53 am ]
Post subject:  Re: Dial Breitling Bullhead chrono-matic ref. 2117

Damn, is it? Hmm, my search gets even harder.. I knew about the datewheel, but not about the hands.. Thanks for your reply..

Author:  WatchFred [ Fri Apr 22, 2016 5:33 am ]
Post subject:  Re: Dial Breitling Bullhead chrono-matic ref. 2117

before u do anything else, I'd verify if at least the movement is correctly marked ?

Author:  WatchFred [ Fri Apr 22, 2016 5:35 am ]
Post subject:  Re: Dial Breitling Bullhead chrono-matic ref. 2117

this is how they look:

Image

Author:  Watchjacco [ Fri Apr 22, 2016 5:53 am ]
Post subject:  Re: Dial Breitling Bullhead chrono-matic ref. 2117

That's a beautiful picture and those are beautiful bullheads! I noticed that your blue 'stunner' doesn't have chronomatic on the dial either? I suppose that the hands and datedisc are impossible to find. If you have any suggestions, please let me know.. The movement is correctly marked, a nice caliber 11.

Author:  WatchFred [ Fri Apr 22, 2016 7:00 am ]
Post subject:  Re: Dial Breitling Bullhead chrono-matic ref. 2117

the "blue stunner" is a manual wind ;) note the different crown positions ;)

hands are not such a huge issue, date disks are hard.
cal. 11 is not really correct for the Pult as these were long gone when it was announced, but that is minor here.

Author:  saabreit [ Sat Apr 23, 2016 1:26 am ]
Post subject:  Re: Dial Breitling Bullhead chrono-matic ref. 2117

Black datedisk for date at 6 + those hands ... Jacco, I suspect that your watch would have been assembled from an unused NOS 2117 case + a manual wind dial + the cal 11 + handset of a Hamilton Chrono-Matic .
As Fred says finding the right handset is possible .
For the datedisk it is very difficult and I am pretty sure that many Pult projects are blocked because lacking datedisk . Maybe the best solution would be to gather orders and launch a batch of datedisk reprint using date at 6 disks which are not hard to find .

Author:  Lofan [ Sat Apr 23, 2016 9:57 am ]
Post subject:  Re: Dial Breitling Bullhead chrono-matic ref. 2117

WatchFred wrote:
this is how they look:

Image


Okay, Fred. Next time your leave your Pupitre's out on the ledge like that, I'm going to have my army of pet Ravens come down and swoop them away... :wink:

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/