The Breitling Watch Source Forums
https://www.breitlingsource.com/phpBB2/

I am going to make a fool out of myself 806's data
https://www.breitlingsource.com/phpBB2/viewtopic.php?f=11&t=34271		 Page 1 of 1
Author:  Dracha [ Wed Oct 19, 2011 10:12 am ]
Post subject:  I am going to make a fool out of myself 806's data
But Ive been gathering some info over the years (who hasnt ?) and stuck it into a presentation

Have a glance and please comment , but be gentle :oops:
And I am not concluding a lot yet , look at it as a discussion opening
For instance, the supposedly misprinted early 806's with a serial that starts with an 8 but really start with 9 etc , I have not concluded yet , maybe a conclusion will follow naturally from the gathered data ?

I cant upload the PDF's so I have linked them from elsewhere

Roff, If you can put it on the site somewhere I can take these links off ?

presentation http://members.casema.nl/rene.kesting/806/806.pdf

data http://members.casema.nl/rene.kesting/806/806%20investigation.xls

Right click on link,. choose 'save as' and open locally to prevent viewing issues
Author:  Roffensian [ Wed Oct 19, 2011 10:34 am ]
Post subject:  Re: I am going to make a fool out of myself 806's data
Great job Dracha!

I'll need to go through it in more detail to provide some more considered thoughts, but a couple of brief knee jerk comments

- The serial # gaps may well be due to shared serial number ranges between chrono and non chrono
- There were a number of beads of rice variations, not simply small / large but 4 or 5 different bead counts
Author:  Dracha [ Wed Oct 19, 2011 10:41 am ]
Post subject:  Re: I am going to make a fool out of myself 806's data
Roffensian wrote:

- The serial # gaps may well be due to shared serial number ranges between chrono and non chrono
- There were a number of beads of rice variations, not simply small / large but 4 or 5 different bead counts


If you have more info on the serial numbers and the bezel bead counts I can add (and recount the beads again :( )
Author:  Chris K [ Tue Oct 25, 2011 10:04 am ]
Post subject:  Re: I am going to make a fool out of myself 806's data
Dracha wrote:
Roffensian wrote:

- The serial # gaps may well be due to shared serial number ranges between chrono and non chrono
- There were a number of beads of rice variations, not simply small / large but 4 or 5 different bead counts


If you have more info on the serial numbers and the bezel bead counts I can add (and recount the beads again :( )

Dracha, the serial numbers have already been cleared last year. (Vide letter from Breitling / viewtopic.php?f=11&t=19598 )

Counting beads truly is a hell of a job. My recommendation: Take a pic of the watch/bezel, make an enlarged printout and count the beads by writing beside each bead the number. Repeat at least 3 times on a new printout. If the results differ, ..... start all over again!

Chris
Author:  Dracha [ Tue Oct 25, 2011 10:26 am ]
Post subject:  Re: I am going to make a fool out of myself 806's data
Chris K wrote:
Dracha wrote:
Roffensian wrote:

- The serial # gaps may well be due to shared serial number ranges between chrono and non chrono
- There were a number of beads of rice variations, not simply small / large but 4 or 5 different bead counts


If you have more info on the serial numbers and the bezel bead counts I can add (and recount the beads again :( )

Dracha, the serial numbers have already been cleared last year. (Vide letter from Breitling / viewtopic.php?f=11&t=19598 )

Counting beads truly is a hell of a job. My recommendation: Take a pic of the watch/bezel, make an enlarged printout and count the beads by writing beside each bead the number. Repeat at least 3 times on a new printout. If the results differ, ..... start all over again!

Chris


Thanks Chris !

regarding the serial numbers , I believe there's enough evidence (even without the Breilting letter) to say that there are no pre-'54's

but personally I have never seen any more than the 2 different bezels , even after recounting several all the large beads seems to have the same numer and so do the small beads ?

and the spreadsheet with details assists me in dating something correctly , to see if the movement is correct or whether or not work was performed on it
Author:  Roffensian [ Tue Oct 25, 2011 10:27 am ]
Post subject:  Re: I am going to make a fool out of myself 806's data
Dracha wrote:
bit personally I have never seen any more than the 2 different bezels , even after recounting several all the large beads seems to have the same numer and so do the small beads ?



I started going through the links in your Excel spreadsheet, just haven't had time to count them all and get consistent numbers.
Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/