Hi All, I have a Transocean that I purchased via this site a few years back under a different ID that I can't recall the details on, from Gil I believe it was. Since then I've also bought a Speedmaster and Carerra. I always wear one of the 3 and swap them out every few month or two so my question is on the winding of them. I use the the below cheap watch winder and have no issues with it. Have it on the go a while now and alternate between the 3 watches. The winder manufacturer recommends setting 2 which is rotate 2 mins, clockwise rest 6 mins and repeat. Same option exists for opposite direction, clock and counter and also 5mins clock then 5 mins counter for 3 hours and rest for 9 hours. I suppose what I'm wondering does setting 2 really sound like the best option ? Someone told me it would be doing more harm than good as the winder never lets the watch rest. Maybe the setting for 3 hours of movement and then 9 hours rest would be better ? Or would I be better of to just turn the thing off and set the watches as I swap them out ? thanks Dave.
https://www.amazon.co.uk/Kalawen-Rot...s%2C148&sr=8-5