I have one of these sets. They come in handy for instances like yours. They'd need to be trimmed to suit though.
| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| Breitling Pro 1 bracelet help https://www.breitlingsource.com/phpBB2/viewtopic.php?f=1&t=67495 |
Page 1 of 1 |
| Author: | Standingby [ Thu Sep 03, 2020 2:24 am ] |
| Post subject: | Breitling Pro 1 bracelet help |
Hi All, Would anybody happen to know the pin and tube diameter sizes for a 20mm Breitling Pro 1 bracelet? I have three extra links but no pins and tubes... While I could probably check this off against one of the other pins and tubes in the bracelet, messing around with it in the first place is why I now need replacements! Thanks for the help. Cheers, Rob |
|
| Author: | 1952 [ Fri Sep 04, 2020 11:10 am ] |
| Post subject: | Re: Breitling Pro 1 bracelet help |
I thought the Pro 1 used tiny screws? |
|
| Author: | bnewbie [ Fri Sep 04, 2020 5:53 pm ] |
| Post subject: | Re: Breitling Pro 1 bracelet help |
Pro 1 uses both pins and screws, depending on age and model. Hollow end linked Pro 1 uses pins, both 18 and 20mm. Solid end linked Pro 1 uses screws, both 20 and 22mm. |
|
| Author: | Standingby [ Sat Sep 05, 2020 12:06 am ] |
| Post subject: | Re: Breitling Pro 1 bracelet help |
1952 wrote: I thought the Pro 1 used tiny screws? Sorry... as per the post above it’s a Pro 1 with pins and tubes, not screws. Mine is a hollow-end link bracelet for a Pluton. The length of the pins are 19mm but the diameter is tricky. From what I can work out, it need to be either 0.9mm or 0.95mm. Likewise the tubes. |
|
| Author: | 1952 [ Sat Sep 05, 2020 5:02 am ] |
| Post subject: | Re: Breitling Pro 1 bracelet help |
I have one of these sets. They come in handy for instances like yours. They'd need to be trimmed to suit though.
|
|
| Author: | Standingby [ Sat Sep 05, 2020 12:57 pm ] |
| Post subject: | Re: Breitling Pro 1 bracelet help |
1952 wrote: I have one of these sets. They come in handy for instances like yours. They'd need to be trimmed to suit though. Thanks - great suggestion. That’s going to take a lot of the guesswork out of it. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|