The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
Wow, servicing has gone up! https://www.breitlingsource.com/phpBB2/viewtopic.php?f=1&t=58028 |
Page 1 of 1 |
Author: | BroncoSport [ Sat Jun 20, 2015 8:04 pm ] |
Post subject: | Wow, servicing has gone up! |
I just got a call from my AD (who is also a certified Breitling repair location) and the price to repair and refinish one of my SteelFish was $850!! And that is no bracelet, I sent it in with a Diver II on it. Seems like the last SteelFish cost me $560, but that was about 2 years ago I think. I also noticed that where they used to have 3 full display cases of Breitling, it is down to 2 and moved out of the central location. I guess folks aren't buying Breitling like they used to. |
Author: | Gill [ Sun Jun 21, 2015 11:32 am ] |
Post subject: | Re: Wow, servicing has gone up! |
I suppose it depends on how much work is done. I sent my three year old Cockpit in for a basic service about a year ago and it ran me about $165. The dealer sent it to Breitling Connecticut. Sent from my iPhone using Tapatalk |
Author: | wessa [ Sun Jun 21, 2015 11:48 am ] |
Post subject: | Re: Wow, servicing has gone up! |
Have you asked for itemised breakdown of the quote? That sounds like a lot. Maintenance prices have gone up at my neck of the woods but by just under 10%. A three hander overhaul here is quoted at less than half of what you have been told. BTW, bracelet refinishing is included in overhaul service. Sending it in on a leather or rubber strap will not make the service cheaper. |
Author: | BroncoSport [ Sun Jun 21, 2015 12:04 pm ] |
Post subject: | Re: Wow, servicing has gone up! |
They should be sending the itemized statements with the watch, next week. I asked over the phone and it sounds like 3 gears, mainspring, winding stem, ratchet for the bezel and refininishing (and various other parts). I am interested in the final list. I guess that might be what it cost for a daily beater that had seen a ton of rugged use over 4 or 5 years of constant wearing. I mean, I wore it almost everyday doing any and all things. |
Author: | FloridaGary [ Sun Jun 21, 2015 1:44 pm ] |
Post subject: | Re: Wow, servicing has gone up! |
I had my Skyracer overhauled completely this year with a date wheel replacement and cost was $700. Sent from my iPhone using Tapatalk |
Author: | kleinbus [ Mon Jun 22, 2015 8:22 am ] |
Post subject: | Re: Wow, servicing has gone up! |
AD will probably send it to Hangar 7 (B's service center here in US) and probably slaps their own markup on top of B's cost. About 6 weeks ago I sent mine directly to Hangar 7 and Avenger M1 overhaul was $400ish (just received the watch)... So shipping with $5k insurace was $85 + $400 for complete service kit + $180 for new saphire chrystal makes total $665 |
Author: | BroncoSport [ Mon Jun 22, 2015 8:15 pm ] |
Post subject: | Re: Wow, servicing has gone up! |
I could see that but all the work was done in house with their watchmaker. They are authorized to do complete movement and case servicing and give a 1 yar warranty but the price seems to have jumped $300 since the last Steelfish was serviced. I should get it in the mail tomorrow, so I will report back on the repair part list. |
Author: | BroncoSport [ Tue Jun 23, 2015 2:32 pm ] |
Post subject: | Re: Wow, servicing has gone up! |
Got the watch in the mail today. Looks brand new, runs like new as well. That is a giant plus since it was sent in DOA. The charges breakdown is as follows: Complete movement service New great wheel New second wheel New third wheel New mainspring New gaskets New bezel spring New spring bars Cleaned and refinished case $850 shipped back to me with no tax (out of state). Guess that is that! Now it's so good looking I might have to go buy a Oris to wear as the daily beater! |
Author: | wessa [ Thu Jun 25, 2015 5:49 am ] |
Post subject: | Re: Wow, servicing has gone up! |
BroncoSport wrote: Got the watch in the mail today. Looks brand new, runs like new as well. That is a giant plus since it was sent in DOA. The charges breakdown is as follows: Complete movement service New great wheel New second wheel New third wheel New mainspring New gaskets New bezel spring New spring bars Cleaned and refinished case $850 shipped back to me with no tax (out of state). Guess that is that! Now it's so good looking I might have to go buy a Oris to wear as the daily beater! So, how much was each item? Complete movement service - it should be part of standard overhaul fee. Don't know about the great, second and third wheel . New barel and new bezel spring should be part of standard overhaul fee, I think. It was for me at least in the past. New gaskets - definitely included in standard overhaul fee. New spring bars - I get them for free just for showing my face at the boutique or the service centre. Cleaned and refinished case - definitely included in overhaul fee. So, what were you charged for: - standard overhaul fee? - additional mandatory items ( the must do to get 1 year warranty) - additional optional items ( nice to do but not necessary to complete the service and get 1 year warranty)? If you did not get this type of breakdown than you should be asking questions. |
Author: | Eric_navi [ Thu Jun 25, 2015 10:15 am ] |
Post subject: | Re: Wow, servicing has gone up! |
Really doesn't sound like that much for a factory service? What am I missing Sent from my iPhone using Tapatalk |
Author: | rebel_1 [ Sat Jun 27, 2015 6:01 pm ] |
Post subject: | Re: Wow, servicing has gone up! |
Does seem steep. Especially for a watch that cost around $2,500 new. This is exactly why I started consolidating a couple of years ago. A few nice watches is way easier on the wallet to maintain than several so mid grade (mid cost) watches. I will admit that my blue SOS made the cut and is IMHO one of the highest value watches ever made, but it is somewhat dissatisfying paying 40% of the value of the watch just to get it serviced. I will no doubt only service my watches when there is a problem. |
Page 1 of 1 | All times are UTC - 8 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |