The Breitling Watch Source Forums
https://www.breitlingsource.com/phpBB2/

aerospace avantage problem
https://www.breitlingsource.com/phpBB2/viewtopic.php?f=1&t=49059
Page 1 of 1

Author:  jimbojones [ Sun Aug 11, 2013 12:12 am ]
Post subject:  aerospace avantage problem

Hi,
I have a new Aerospace Avantage, less then a year old.
Analog time is running 2min slower then digital.
Any way to fix the problem?

Thanks

Author:  TomP [ Sun Aug 11, 2013 1:01 am ]
Post subject:  Re: aerospace avantage problem

D'you mean it's losing time relative to digital display (a strange one, off for attention under warranty I'd say) or simply that they're not synchronised?

Author:  jimbojones [ Sun Aug 11, 2013 1:24 am ]
Post subject:  Re: aerospace avantage problem

Analog is running behind digital by 2min.

Or I just might be a dumbojones and don't know how to synchronize analog with digital??
I don't have my ops manual to check that out.

I apologize if it's a stupid question.

Author:  TomP [ Sun Aug 11, 2013 7:39 am ]
Post subject:  Re: aerospace avantage problem

The manual is readable / downloadable @

http://www.breitling.com/en/service/user-manuals/

Scroll down to the 'Aerospace' one (yours being a year old is almost certainly an Aerospace and not an Aerospace Avantage, which people kept calling them to distinguish them from the previous model, but which was actually only produced 2005-6; and either way it doesn't matter because the instructions are the same...)

Scroll down to 'Synchronising the analog and digital time displays'.

Sorted.

Author:  yogi18 [ Sun Aug 11, 2013 7:40 am ]
Post subject:  Re: aerospace avantage problem

jimbojones wrote:
Analog is running behind digital by 2min.

Or I just might be a dumbojones and don't know how to synchronize analog with digital??
I don't have my ops manual to check that out.

I apologize if it's a stupid question.


No question is stupid. Was the 2 minutes difference was always an issue or its just a recent thing. There is a way to sync the digital with the analog. Select the neutral position (both displays are dark) and pull the crown. You would now see the time (with difference) on the bottom display, an R will be displayed on the top display. Turn the crown on either direction till you have the same time on analog and digital. Once you're done, just push the crown back and you're all set. If the problem persists, send the watch for servicing at Breitling.

Author:  jimbojones [ Sun Aug 11, 2013 9:32 pm ]
Post subject:  Re: aerospace avantage problem

It worked, problem solved. Thank you!

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/