| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| Super avenger question https://www.breitlingsource.com/phpBB2/viewtopic.php?f=1&t=46694 |
Page 1 of 1 |
| Author: | trelos [ Sat Apr 06, 2013 10:38 am ] |
| Post subject: | Super avenger question |
Just picked up my first Breitling and lucky enough to grab a super avenger. It is used but still new to me. Here's my question on the screw down crown when I release it it seems a little loose like the pin is barely holding on. Also when tightening the crown back down it makes a very faint wind sound...all normal? Or do I have an issue? Thanks in advance |
|
| Author: | Driver8 [ Sat Apr 06, 2013 11:21 am ] |
| Post subject: | Re: Super avenger question |
The crown shouldn't be loose even when unscrewed, so it may be worth getting it looked at. With regards to hearing a winding sound when screwing the crown in, that's perfectly normal as the action of screwing the crown is the same as manually winding the movement. |
|
| Author: | trelos [ Sat Apr 06, 2013 3:00 pm ] |
| Post subject: | Re: Super avenger question |
It's so weird. Tight it's good. When open it feels like just the end of the crown is loose. Not the shaft itself just the knob. |
|
| Author: | Roffensian [ Sat Apr 06, 2013 3:14 pm ] |
| Post subject: | Re: Super avenger question |
As Driver8 says, not normal and it needs to be checked. |
|
| Author: | Leonidas [ Sat Apr 06, 2013 7:57 pm ] |
| Post subject: | Re: Super avenger question |
I just checked mine. The winding sound when you tighten the screw down crown is normal. When pulled out I would say the stem is easily turned and is very sensitive as to moving the hands. I wouldn't call it loose though. |
|
| Author: | mysticbluesl [ Sat Apr 06, 2013 11:21 pm ] |
| Post subject: | Re: Super avenger question |
Ive just had my sa back from Breitling because the crown wouldn't screw in [they fixed it under warranty].The winding sound when you tighten the screw down crown is normal but the crown doesn't feel loose . |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|