The Breitling Watch Source Forums
https://www.breitlingsource.com/phpBB2/

I Would Like to Apologize for My Etiquette Thread
https://www.breitlingsource.com/phpBB2/viewtopic.php?f=1&t=29677		 Page 1 of 1
Author:  11B2P [ Wed Apr 27, 2011 6:09 pm ]
Post subject:  I Would Like to Apologize for My Etiquette Thread
I did not mean to upset the harmony of the forum.
Author:  sco [ Wed Apr 27, 2011 6:21 pm ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
As far as I'm concerned, there is no need to apologize. Hopefully you got some good info out of your thread. Please keep us informed on your purchase.
Author:  boogiebot [ Wed Apr 27, 2011 7:11 pm ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
sco wrote:
As far as I'm concerned, there is no need to apologize. Hopefully you got some good info out of your thread. Please keep us informed on your purchase.


so whats going on with the sizing issues? :popcorn:
Author:  BroncoSport [ Wed Apr 27, 2011 7:29 pm ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
:nutkick: ....guess I shouldn't have opened that can of worms. :)

11B2P, I hope that the "heated" conversation doesn't throw you off. In between the banter (most of which is harmless) there was some good information.

I will leave you with this advice. Establish a relationship with your local dealer and dont be afraid to "kick the tires". Any of these watches we covet are cheap and you have to "feel" the watch before the purchase should happen. You will know when its the "right one" (this time!).
Author:  FEAR [ Wed Apr 27, 2011 7:35 pm ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
and as a dealer, we see em all, guys who walk in and point at a watch and say "i'll take it" and some who try it on for hours at a time. do what makes you comfortable.
Author:  JacksonStone [ Wed Apr 27, 2011 9:30 pm ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
11B2P wrote:
I did not mean to upset the harmony of the forum.

You have nothing to apologize for. You didn't upset anything. Things can get heated here on occasion, and sometimes the mods have to kick some asses, but on the whole, this is a good group of guys. I certainly hope we didn't put you off. You had every right to ask the questions you did, and hopefully, as others have said, you got some good info in between the barbs.
Author:  watchdawg [ Wed Apr 27, 2011 10:16 pm ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
You did nothing to apologize for. You asked a question seeking information and some people forget that they were new guys once and needed information too.
Author:  Driver8 [ Thu Apr 28, 2011 2:58 am ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
And as a mod I echo the other comments that have all said you have nothing to apologise for 11B2P. Questions and discussion are what all forums thrive on, as is a bit of banter between members. Sure, sometimes things can get a bit heated, but for the most part it's good natured and all part of the forum. And when it ceases to be entirely good natured, that's when we try to clam things down a bit. But back to the original point, there's no need to apologise at all. :thumbsup:
Author:  Roffensian [ Thu Apr 28, 2011 4:26 am ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
Driver8 wrote:
And as a mod I echo the other comments that have all said you have nothing to apologise for 11B2P. Questions and discussion are what all forums thrive on, as is a bit of banter between members. Sure, sometimes things can get a bit heated, but for the most part it's good natured and all part of the forum. And when it ceases to be entirely good natured, that's when we try to clam things down a bit. But back to the original point, there's no need to apologise at all. :thumbsup:



:yeahthat

Just don't let it happen again :lol: :wink:
Author:  mrcheatle [ Thu Apr 28, 2011 4:39 am ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
You know it's funny... I read the entire thread last night and when I went to comment, it was blocked! :lol:

For what it's worth...I agree with mfserge... Once you have your options narrowed down to two(possibly three), hell ya I would make them resize it for me! And if they didn't want to do it I'm going somewhere else.

This is the exact reason why I like to build a relationship with my AD (George), I know them and they know me. If I tell George I am stuck between this this and that, he has know problem doing what ever it takes to make me leave happy!

Bottom line with Etiquette in my book... If you build a relationship with your AD you will have a more personal experience and they will have now problem doing things for you that they may not typically do for others. :D
Author:  H2F [ Thu Apr 28, 2011 6:15 am ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
Apologize??? Bollocks! You have my sincere gratitude instead for one of the funniest thread I've read in a while!! :lol:

To size or not to size... :lol:
Author:  andrew692003 [ Thu Apr 28, 2011 7:26 am ]
Post subject:  Re: I Would Like to Apologize for My Etiquette Thread
H2F wrote:
Apologize??? Bollocks! You have my sincere gratitude instead for one of the funniest thread I've read in a while!! :lol:

To size or not to size... :lol:


I have to agree. I hadn't read past the first page for no other reason than I couldn't be arsed to red through 5 pages of it, boy, what a mistake! :D

I have just spent the last 10 minutes reading those posts and have LOL on several occasions with my colleagues wondering why I'm wetting myseld at the computer. Needless to say I'm too embarassed to tell them I'm on 'the' forum! :D :D :D

Funniest thread I've read here for ages.

Cheers
Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/