| The Breitling Watch Source Forums https://www.breitlingsource.com/phpBB2/ |
|
| Bergeon Spring-bar removal tool - which one? https://www.breitlingsource.com/phpBB2/viewtopic.php?f=1&t=16525 |
Page 1 of 1 |
| Author: | sparki [ Thu Feb 04, 2010 6:39 pm ] |
| Post subject: | Bergeon Spring-bar removal tool - which one? |
Hi, I am new to the forum having recently purchased my first Breitling watch - Skyracer. The watch is on a metal bracelet, but I have ordered a leather strap so I will need a spring-bar removal tool to change the straps. I have read other posts saying good things about the Bergeon make, but I am not sure which model # to buy: 6767-s (standard) or the 6767-f (fine) ? Can anyone please advise which would be best? Many Thanks! |
|
| Author: | br549 [ Thu Feb 04, 2010 6:43 pm ] |
| Post subject: | Re: Bergeon Spring-bar removal tool - which one? |
Hi sparki. Welcome to the site. The Bergeon Spring Bar Tool 6767-F is what you'll need to do the job. |
|
| Author: | Tim S [ Thu Feb 04, 2010 6:50 pm ] |
| Post subject: | Re: Bergeon Spring-bar removal tool - which one? |
br549 wrote: Hi sparki. Welcome to the site. The Bergeon Spring Bar Tool 6767-F is what you'll need to do the job. I totally agree, a great tool the Bergeon 6767F! If you haven't made the change before then I would caution care as it's very easy to scratch your lugs when changing between bracelet and strap, which then requires a bit of work with a cape cod  Congratulations on the skyracer, one of my favourites. |
|
| Author: | sparki [ Thu Feb 04, 2010 7:21 pm ] |
| Post subject: | Re: Bergeon Spring-bar removal tool - which one? |
Thanks for the prompt responses! |
|
| Author: | RJRJRJ [ Thu Feb 04, 2010 7:29 pm ] |
| Post subject: | Re: Bergeon Spring-bar removal tool - which one? |
6767-f or 6111. |
|
| Author: | dhalem [ Thu Feb 04, 2010 7:37 pm ] |
| Post subject: | Re: Bergeon Spring-bar removal tool - which one? |
This idea is freaking awesome: http://forums.timezone.com/index.php?t= ... sg_4831342 |
|
| Author: | oBMTo [ Thu Feb 04, 2010 8:02 pm ] |
| Post subject: | Re: Bergeon Spring-bar removal tool - which one? |
dhalem wrote: This idea is freaking awesome: http://forums.timezone.com/index.php?t= ... sg_4831342 Hmm, I guess my suturing kit will come into handy after all
|
|
| Author: | aero [ Fri Feb 05, 2010 9:23 am ] |
| Post subject: | Re: Bergeon Spring-bar removal tool - which one? |
I always put a piece of clear scotch tape over the area on which I'll be using a screwdriver or springbar tool. That way, if I slip, it decreases the problem of scratching. It also helps a bit to keep screws from going rogue, since I pop the screwhead through the tape, and it sort of holds it... Hard to explain that part, anyway, good luck! And good on you for getting the right tool for the job. -Dan |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|