The Breitling Watch Source Forums
https://www.breitlingsource.com/phpBB2/

How to remove links from a Bentley Speed bracelet??????
https://www.breitlingsource.com/phpBB2/viewtopic.php?f=1&t=14473		 Page 1 of 1
Author:  Brentomatic [ Tue Nov 24, 2009 9:30 am ]
Post subject:  How to remove links from a Bentley Speed bracelet??????
I need to remove a link from one side of my Bentley Speed Bracelet and then move it to the other side thus making the clasp "balanced" on my wrist. I removed the screw that holds the link but however nothing happens once the screw is removed? I didn't want to force anything so I've left it alone until I can get precise information.

Any one have any?
Author:  br549 [ Tue Nov 24, 2009 10:18 am ]
Post subject:  Re: How to remove links from a Bentley Speed bracelet??????
I've never dealt with a Speed bracelet but assuming that it's of similar construction to that of a Pilot or Pro bracelet you will need to remove both screws of a single link not just one. One end (side) of the link has two bars attached to it and the other end is free. One of the bars goes through the lower link and the other through the one above. Once you remove both screws then the outer piece should come off and the other side can be pulled out releasing the center link which will fall free.

This link may help.
http://www.breitlingsource.com/video_ar ... Adjustment
Author:  Driver8 [ Tue Nov 24, 2009 11:33 am ]
Post subject:  Re: How to remove links from a Bentley Speed bracelet??????
br549 wrote:
I've never dealt with a Speed bracelet but assuming that it's of similar construction to that of a Pilot or Pro bracelet you will need to remove both screws of a single link not just one. One end (side) of the link has two bars attached to it and the other end is free. One of the bars goes through the lower link and the other through the one above. Once you remove both screws then the outer piece should come off and the other side can be pulled out releasing the center link which will fall free.

This link may help.
http://www.breitlingsource.com/video_ar ... Adjustment

:yeahthat The Speed is identical in construction to all other Breitling bracelets and as br549 quite rightly said you need to remove both screws to remove a link.
Author:  Brentomatic [ Tue Nov 24, 2009 2:23 pm ]
Post subject:  Re: How to remove links from a Bentley Speed bracelet??????
EXCELLENT replies! I will try again this evening. Thank you both VERY much. This is most helpful.
Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/